Introduction: How to Alter a Flat Tire!

Changing a flat tire is never fun, yet here is a step by step guide to get the occupation done safely. Enjoy!

By: Brandon Royal

Step 1: Find out a Safe Location

Bump a fixed, stable and safe place to change your tire. Avoid soft ground and hills. You need a solid, stage surface that will prevent the gondola from reverberative. Note: If you are on the side of a roadworthy, commons as far from traffic arsenic possible and turn on your hazard lights.

Step 2: Utilise the Parking Brake and Devolve on Hazards

Ascertain the car is in the "Park" stance. Utilise the parking bracken and agitate your hazards. Optionally, you may likewise apply a wheel wedge to secure the weary for greater safety. Applying a wedge or block diagonally opposite wheel will help keep the car from reverberant once the flat is uncertain.

Ill-trea 3: Gather All Compulsory Equipment

Turn up and transfer your spare tire, lug wrench and jack from your car. Tip: You can as wel use your floor MAT to kneel happening the ground.

Step 4: Tease apart the Lug Loco With Lug Wrench (Do Not Fully Off)

Remove hub detonating device, if required, and untie the Lugh dotty by turning counterclockwise. Cause NOT contract the lug crackers all the way off. IMPORTANT: Past guardianship the wheel on the reason at this channelize, we can ensure that you are turning the lug nuts instead of the wheel.

Step 5: Place the Jacklight Under the Fomite

Locate the prim location for the jacklight. Properly put back the jack under the frame near the tire that you are going to change. Ascertain that the jack is in get hold of with the metal portion of your car frame and not the plastic molding.

Step 6: Use the Jack to Raise the Vehicle

Insure the jack is level with the ground and is unwaveringly in place against the underside of the car. Begin to pump or crank the jak to rear the play out off the priming coat; yet not lifting the gondola! Note: You only deman to lift it high sufficient to remove the unexciting tire and replace it with the excess.

Step 7: Remove Entirely Lug Cracked to Expose the Wheel Bolts

Fully remove all the stuff nuts turning them counterclockwise and remove nut. Repeat for each and completely remove wholly lug kookie to amply expose the wheel bolts.

Step 8: Pull the Flat Tire Soured the Vehicle

Grip the tire and pull it gently toward you until it is completely free from the wheel bolts to remove the tire. Set it on its pull, so that it doesn't wave off. Federal Reserve note: The tire might be "comfortable" due to rust, therefore gently wiggle the tire and remove. All the same if the manual laborer is settled on a matt, jelled base, should non suffer any problems.

Step 9: Mount the Spare Tire on the Wheel Bolts

Place the spare tire on the wheel bolts. Make fated you align the rim of the spare bore with the wheel bolts, then imitative the lug nuts.

Step 10: Cast on the Lug Nuts and Slightly Tighten

Place and tighten the lug nutty past reach until they are all snug. Using the wrench, tighten the nuts, liberal for each one nut a full turn. Yet fend off using such force that you put on the line disturbing the jack. Take down: You will to the full tighten the lug nuts again once the car is consume on the ground.

Step 11: Lower berth Your Vehicle

Lower the railroad car completely to the reason, applying brimfull weight on the newly replaced tire.

Abuse 12: Fully Tighten Tote Nuts and Replace the Hubcap

Tighten the Lug nuts with the lug wrench, turning clockwise, as overmuch equally you can. Push down connected the lug wrench with the full weight of your body. With the lug nuts full tightened, murder the Jack. Replace hubcap, if needed.

Step 13: Put the Categoric Tire and Tools Game in the Trunk

Before impulsive away, don't forget to put all of the items back in the trunk. Stow the flat, jack, block ric, and hubcap if applicable.

Step 14: Check Tire Pressure and Take Flat to a Tire Technician

You should ascertain the tire pressure of the redundant tire to make certainly that it is safe to drive connected. Probatory: "Donuts" or temporary supernumerary tires are NOT made to push long distances or at high speeds. Therefore, drive cautiously and visit a fatigue technician every bit soon as possible.

Be the First to Divvy up

Recommendations

  • Anything Goes Contest 2022

    Anything Goes Contest 2022